Markup vs margin for trades: how much to mark up materials

By Carlos B., Founder, Always On Tradie7 min read

Markup vs margin is the difference between profit measured on your cost and profit measured on your price. A 30% markup on materials gives you a 23% margin, not 30%. Here is how to convert between them, and how much to mark up materials so the job makes what you think it makes.

Markup vs margin comes down to one question: what is the profit a percentage of? Markup is profit as a percentage of what the item cost you. Margin is profit as a percentage of what you sold it for. Buy a part for $100 and sell it for $130, and you have a 30% markup but only a 23% margin.

Mixing the two up is a common way a trade business underprices work without noticing. This guide gives you the formulas, a conversion table you can keep next to your price list, worked examples on real-looking materials, and a way to decide your own materials markup.

What is the difference between markup and margin?

Markup is calculated on cost and margin is calculated on the selling price, so for the same sale the markup percentage is always bigger than the margin percentage. Both describe the same dollars of profit; they just divide it by different numbers.

  • Profit = sell price − cost.
  • Markup = profit ÷ cost.
  • Margin = profit ÷ sell price.
  • Sell price from a markup = cost × (1 + markup).
  • Sell price from a margin = cost ÷ (1 − margin).

Take that $100 part sold for $130. Profit is $30. Markup is $30 ÷ $100 = 30%. Margin is $30 ÷ $130 = 23.08%. Same job, same $30, two different percentages.

When to use each one

Use markup when you're pricing: it's the quickest way to turn a cost into a sell price on a quote (or estimate). Use margin when you're checking how the business is doing, because your accountant, your profit and loss statement and most business benchmarks talk in margin. Trouble starts when you set a markup and then read it as a margin.

How do you convert markup to margin?

To convert markup to margin, divide the markup by one plus the markup: margin = markup ÷ (1 + markup). A 25% markup is 0.25 ÷ 1.25 = 20% margin. Use this table to read off the common ones:

Markup to margin. Margin = markup ÷ (1 + markup), rounded to two decimal places.
Markup on costMargin on sell price$100 cost sells for
10%9.09%$110
15%13.04%$115
20%16.67%$120
25%20.00%$125
30%23.08%$130
40%28.57%$140
50%33.33%$150
60%37.50%$160
75%42.86%$175
100%50.00%$200

Notice that the gap widens as the numbers grow. At 10% the two are close. At 100% markup, doubling your cost, the margin is only 50%. And no markup, however large, ever reaches a 100% margin, because that would mean the item cost you nothing.

What markup do I need for the margin I want?

To hit a target margin, convert it to a markup with markup = margin ÷ (1 − margin), or skip the markup and price directly with sell = cost ÷ (1 − margin). A 30% margin needs a 42.86% markup, not 30%.

Margin to markup. Markup = margin ÷ (1 − margin), rounded to two decimal places.
Margin you wantMarkup you need$100 cost sells for
10%11.11%$111.11
15%17.65%$117.65
20%25.00%$125.00
25%33.33%$133.33
30%42.86%$142.86
35%53.85%$153.85
40%66.67%$166.67
50%100.00%$200.00

If you remember one row, make it this one: a 25% markup is a 20% margin, and a 20% margin needs a 25% markup. It is the easiest pair to sanity-check a quote against in your head.

Worked examples on materials

The examples below use made-up but realistic costs. The arithmetic is exact, so you can follow it with a calculator and swap in your own numbers.

One item: a hot water unit

Say a hot water unit costs you $1,240 and you mark it up 30%. The sell price is $1,240 × 1.30 = $1,612. Profit is $372. Margin is $372 ÷ $1,612 = 23.08%.

The mistake: wanting 30% margin, charging 30% markup

Now say you decided your materials should earn a 30% margin. To get it, the sell price must be $1,240 ÷ 0.70 = $1,771.43, which is a 42.86% markup and $531.43 profit. Charging $1,612 instead leaves $159.43 on the table on one item.

A whole job: bathroom materials

Say a bathroom renovation needs tiles at $1,800, waterproofing at $350, adhesive and grout at $220 and tapware at $640. Total cost is $3,010. With a 25% markup the materials sell for $3,762.50, a profit of $752.50 and a margin of exactly 20%.

If you'd meant to earn a 25% margin, the materials should have sold for $3,010 ÷ 0.75 = $4,013.33, a profit of $1,003.33. The difference is $250.83 on one job. Do 40 jobs like that in a year and it's more than $10,000 you thought you were making but never charged.

The discount trap

Back to the $1,612 hot water unit at a 30% markup. The customer asks for 10% off and you agree. The new price is $1,450.80, so profit falls from $372 to $210.80. Your markup is now 17% and your margin 14.53%. A 10% discount cut the profit on that item by more than 43%.

Discounts come out of your profit, not out of your cost, which is why they hurt far more than the headline percentage suggests. If you have to move on price, take something out of the scope instead.

How much should trades mark up materials?

There is no single right markup on materials; the right one covers what it costs you to handle them and still leaves a profit. Rules of thumb vary by trade, region and job type, so work it out from your own costs rather than copying someone else's number.

What your materials markup has to pay for

  • Time spent pricing, ordering and picking up materials, including trips to the supplier.
  • Returns, wrong deliveries and offcuts that end up as waste.
  • Callbacks and warranty work when a part fails.
  • Money tied up between paying the supplier and being paid by the customer.
  • Stock you carry in the van or the yard.
  • A profit on top, because you are taking the risk on the part.

Tiered markup: more on small items, less on big ones

Many trade businesses use a higher markup on cheap items and a lower one on expensive items, because handling a $40 bag of fixings takes as much effort as handling a $1,240 unit, and customers are more likely to price-check the big item. Here's an example, with tiers you would set from your own numbers:

Example tiered markup. Tiers are illustrative; set your own.
ItemCostMarkupSell
Fixings and sealant$4050%$60
Tapware$64025%$800
Hot water unit$1,24020%$1,488
Total$1,92022.29% blended$2,348

Profit on those materials is $428, a blended markup of 22.29% and a margin of 18.23%. Whatever tiers you choose, check the blended margin on a few real jobs to make sure it lands where you expect.

Subcontractor work needs a markup too

The same logic applies when you bring in a subcontractor. You find the work, coordinate it, carry the customer relationship and stand behind the result, so passing their invoice through at cost means doing all of that for free.

Say a subcontractor invoices you $2,000 for their part of a job and you add a 15% markup. You charge the customer $2,300, a profit of $300 and a margin of 13.04%. Set the percentage the same way as for materials: decide the margin you need for the risk and the coordination, then convert it.

A 30-second check on any quote

Before a quote goes out, add up the cost of the materials and the sell price of the materials. Divide the difference by the sell price. If the answer is below the margin you decided on, the quote is underpriced, whatever markup you thought you used.

Five rules that keep your margins honest

  1. Work from your real cost. Use the price you actually pay after trade discount, plus freight. If you claim back the tax on what you buy, use the price before tax; if you can't, include the tax in your cost.
  2. Decide the margin you want first, then convert it to a markup with the table above. Never use the same percentage for both.
  3. Update costs when suppliers change prices. A markup on last year's cost is a smaller markup than you think.
  4. Check margin on finished jobs, not just on quotes. Extra materials, returns and variations change the real figure.
  5. Keep sell prices and margins away from people who don't need them, so a crew member doesn't tell a customer what a part costs.

Set markup once, not on every quote

The easiest way to stop markup mistakes is to keep markup in your price list, not in your head. Store each item with its cost and markup, let the sell price follow, and every quote and invoice uses the same numbers. When you want to see what a whole job made, the costs and sell prices are already on it.

That's how Always On Tradie handles it: a catalogue with cost, sell and markup for every item, quotes built from it, and a charge sheet on every job that shows its profitability. Crew and contractors never see sell prices or margins. See how it looks in markup and margins on the homepage.

Getting the markup right is only half of pricing a job. For what else belongs on the page, read how to write a quote for a job, and if your labour keeps running past what you priced, booked vs actual hours shows how to find the gap.

Questions

Is a 50% markup the same as a 50% margin?

No. A 50% markup gives a 33.33% margin: an item that costs $100 sells for $150, and the $50 profit is a third of the price. To earn a 50% margin you need a 100% markup, selling the $100 item for $200.

How do I calculate the sell price from a margin?

Divide the cost by one minus the margin. For a 25% margin on a $400 item, $400 ÷ 0.75 = $533.33. Check it: the $133.33 profit is 25% of $533.33.

Should I mark up labour as well as materials?

Labour is usually priced with an hourly or job rate that already includes overheads and profit, rather than a markup on wages. Whichever way you do it, the rate has to cover wages, on-costs, time that can't be billed, and a profit. Track the hours each job actually takes so you know the rate holds up.

Why does my margin look lower than my markup?

Because margin divides the same profit by a bigger number, the sell price, while markup divides it by the cost. For any profitable sale, the margin percentage is always lower than the markup percentage. Use the conversion table to see the margin your markup actually gives you.

Related reading